34
3. When the product is weighed and the judgment item is judged, a signal will be output from the specified DO
according to the delay time and hold time.
For details about the delay and hold time, refer to “4.6.6. Setting the delay and hold time.”
4. When the Stop column is checked, the conveyor will stop according to the result of the specified judgment item.
5. Touch the RETURN key
to return to the Product Setting screen.
4.6.6.
Setting the delay and hold time.
DO behavior after the judgment result is set.
Delay time is the time elapsed from judgment result output until a signal is output from the specified DO.
Hold time is the time a signal is being output from the specified DO.
Fig.30 DI/DO timing chart
時間
質量波形
光電センサ
チャタリング防止
DI 受付時間
DI 入力
DI チャタリング
DO 遅延時間
DO 保持時間
検出
DO 出力
DI
判定
検出
Mass waveform
Photosensor
Chattering prevention
DI receive time
Digital input (DI)
DI chattering
DO delay time
DO hold time
Detected DI detected Judge
Digital output (DO)
Time
