A3 Smart Home Qolsys IQ Panel 2, Installation Manual

Page: 10 / 177

1. With the included power
supply and cable, plug the
barrel connector into the jack
next to the terminals as shown
above.
2. Route the cable under the
hook next to the battery.
3. Route the cable through
the strain relief opening.
Replace the cover by
inserting the top first, then
while making sure the cable
passes under the opening
firmly press down on the
bottom until the cover
“snaps” into place.
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 10 177
TABLE STAND OPTION
Insert your thumb or finger
under the opening on the
back cover and firmly pull
up to remove.
1
2
3
Insert table stand dowels
into the 2 upper keyholes.
Slide the stand firmly
upwards until you hear a
“click” from each side.
INSTALLING THE PANEL