A3 Smart Home Qolsys IQ Panel 2, Installation Manual

Page: 124 / 177

Z-WAVE TESTS
COUNTER DESCRIPTION
Acked commands no auto
route Command was successful and acknowledged by the sensor; it did not use the normal automatic Z-Wave network route to execute the
command for this device (command was re-routed on the Z-Wave network in order to succeed)
Acked commands auto route
Command was successful and acknowledged by the sensor; it used the normal automatic Z-Wave network route to execute the
command for this device.
Failed commands network
failed
Not possible to transmit data because Z-Wave network is busy (jammed). Command failed to execute.
Network failed Not possible to transmit data because Z-Wave network is busy (jammed). Command failed to execute
Network not idle Auto-routed command failed because Z-Wave network is not yet stable. Command failed to execute.
Network no route Auto-routed command failed because there is no successful Z-Wave network route to the device. Command failed to execute
Reset All Resets all counters back to 0 as to better diagnose the network
Details Shows individual device details such as passed and failed commands. Here you can also reset an individual device’s counter
QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE OF 124 177
SYSTEM TESTS