QOLSYS CONFIDENTIAL AND PROPRIETARY
PAGE
OF
153
177
BATTERY REPLACEMENT
1.
Power down panel:
Go to Advanced Settings and enter the
Installer/Dealer/Master code, then select “Power Down”
2.
Unplug Battery Connector:
Once the panel is powered down,
unplug 4 pin battery connector from the board.
3.
Remove Battery:
Pull the blue tab from under the battery
downwards. This will peel away the tape holding the battery in
place.
4.
Install New Battery:
Remove the protective film from the
adhesive tape on the back of the battery and seat the battery
into the bottom lefthand plastic corner. Plug the battery
connector back into the board.
2.
3.
4.
CAUTION:
Do
NOT
use a screwdriver or anything sharp that could puncture
the battery.
Do
NOT
pull on the battery cable to try and remove battery.
MAINTENANCE
Summary of Contents for Qolsys IQ Panel 2
