PANNORAMIC® SCAN RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
93
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
•
Rectangle tool
–
Draw rectangle shaped area.
•
Ellipse tool
–
Draw ellipse selection.
•
Polygon tool
–
Area selection by defining a polygon shape. Finish area selection
by double-clicking with the mouse at or near the starting point.
•
TMA tool
–
TMA tool is used for selecting TMA spots on TMA slides. You can set
the selection settings on the following four tabs:
Figure 76. TMA tool
•
TMA Grid Setting
–
This function is enabled only if a TMA grid has already been
placed on the preview image. Set grid parameters (row and column numbers) and spot
shape (round or rectangle).
Figure 77. TMA tool: Grid selector
Delete TMA grid by clicking the
X
at the top right corner and rotate grid by clicking the
icon at the bottom right corner. Enter the number of rows and columns in the
Rows
and
Columns
fields or select the appropriate values with the arrows. Enter the distance
between two spots on the X and the Y axis in µm in the
Core distance
fields or select the
appropriate values with the arrows. Enter the average diameter of the spots in the
Core
size
field or select the appropriate value with the arrows.