PANNORAMIC® SCAN RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
74
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
5.1.2.2
Exposure Indicator
Activate
Exposure indicator
function by clicking
. Click
to calculate exposure
time for the actual Live image. In Brightfield mode there is no option for manually setting
the values. Exposure time can be displayed in microsecond, millisecond, and in second.
Figure 53. Window of Exposure Indicator in Brightfield scan mode
Image Intensity
Click
to open Image intensity settings window. An
image
is defined as a two-
dimensional function f (x, y) the amplitude of at any pair of coordinates (x, y) is called
the
intensity
or gray level of the
image
at that point. The pixel intensity at the coordinate
pointing at with the cursor is displayed in the Image Intensity window.
Figure 54. Window of Image Intensity
5.1.2.3
Stage Positioning
Click
to activate
Stage Positioning Tool
to navigate on the slide, so to perform
microscope movements on the Live image with this control function. The nu mber at the
center of the controller defines the step size by which the stage is moved. Value can be
entered by hand or with the slider.
Figure 55. Stage positioning tool
This tool offers easy and punctual slide navigation in distinctive steps. Set step size (FoV)
–
1
,
½
, or
¼
to determine the size of movement in proportion of one FOV. Click an arrow to
move to the required direction with the set step size.