3D Histech PANNORAMIC SCAN RX User Manual Download Page 106

Page: 106 / 161

PANNORAMIC® SCAN RX 1.0

SCANNING MODES AND SETTINGS

MAY 13, 2021

105

FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .

Before loading the CSV file, the required settings in the Planner mode must be perf ormed.

•

Save CSV

–

Rack number, slide position, slide name, profile name, illumination type data

can be saved to a CSV file.

Profile management for all the magazines

–

The following profile-related tasks

applicable for the planner can be performed:

•

Add current profile to all racks

•

Open profile for all racks

•

Detach current profile from all racks

•

Detach profiles from racks

•

Clear planner

•

Clear all slide results from every rack

Figure 98. Profile management for all the magazines menu

Jump to scanned

–

Loads the planner view of the actual slide during scanning.

Settings

Help

Summary of Contents for PANNORAMIC SCAN RX


































































































































































Search results

Summary of Contents for PANNORAMIC SCAN RX

Reviews:

3D Histech PANNORAMIC SCAN RX, User Manual, Page: 106 / 161

Search results

Summary of Contents for PANNORAMIC SCAN RX

Reviews: