PANNORAMIC® SCAN RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
110
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
•
Notes
Notice:
Once scanning has finished, the thumbnail of the digital slide is added to the card at the
bottom. Double click the thumbnail image of the digital slide to open it in Viewer. If scanning
is performed to a local destination, the digital slide can be opened in CaseViewer or
SlideViewer only, but when scanned to CaseCenter or SlideCenter, it can be opened in
InstantViewer™ as well (depending
on the settings made in
Settings
/
Preferences
/
Server
scan result viewer
).
5.3.5
Table View Mode
By clicking
each slide will be displayed in a separate row.
Click
to assign profile to a slide, and
to detach a profile from a slide. A slide can have
more than one profile assigned to it, and these profiles can either be BF or FL if the scanner
is capable to operate in these two scanning modes.
Figure 106. Table view mode
In Table view, the following information are displayed in the profile strip based on the loaded
profile:
•
Profile
•
Illumination
•
Priority
•
Quant probe