PANNORAMIC® SCAN RX 1.0
INSTALLATION
MAY 13, 2021
29
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
2.6
External Power Supply Unit
For the proper operation of the scanner, the
SINPRO
–
MPU101-108
24V external power
supply unit must be connected between the mains power and the device.
Front panel:
1.
main power switch
2.
power supply connector
Back panel:
3.
detachable power cord to connect the external power supply unit with the main
unit
Figure 6. 24V external power supply unit
2.7
Power the Scanner On/Off
To turn the scanner on, press down the
I
side of the rocker switch at the front panel of the
24V external power supply unit (
Figure 6
–
1), and press
O
to power the scanner off.