PANNORAMIC® SCAN RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
70
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
•
TMA tool
–
TMA tool is used for selecting TMA spots on TMA slides. You can set the
selection settings on the following four tabs:
Figure 47. TMA grid preview
•
TMA Grid Setting
–
This function is enabled only if a TMA grid has already been
placed on the preview image. Set grid parameters (row and column numbers) and spot
shape (round or rectangle).
Figure 48. TMA tool: Grid selector
Delete TMA grid by clicking the
X
at the top right corner and rotate grid by clicking the
icon at the bottom right corner. Enter the number of rows and columns in the
Rows
and
Columns
fields or select the appropriate values with the arrows.
Enter the distance between two spots on the X and the Y axis in µm in the
Core distance
fields or select the appropriate values with the arrows. Enter the average diameter of the
spots in the
Core size
field or select the appropriate value with the arrows.
•
Clear scanmap
–
The entire scanmap area will be cleared and reset to default.