PANNORAMIC® SCAN RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
57
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
5.1.1
Profile Settings Panel
Objective settings
This field displays the objective used for scanning.
Figure 33. Objective settings
•
Objective type
o
20×
or
40×
•
Output resolution
o
Fix values are:
37× Native
for 20× objective, and
73× Native
for 40× objective.
Focus settings for the scan profile
Figure 34. Focus settings for scan profile
•
Limits of the range
: You can define focus limits by selecting
Limits of the range
for
focusing. You can set the upper and lower limits by selecting the desired value in the
selection boxes. This is useful if focusing was not targeted on the specimen, but on a spot
on the coverslip.
•
Focus distance:
the distance of focal points can be set to create a focus map, based on
which the software calculates interpolated focus values (one step in distance is one FOV).
•
Auto focus:
Focus value is set automatically to match sample characteristics.
•
Manual focus:
The manually set focus point coordinates are listed.
Set
and
Go to
options
are available on this panel too, and each point can be deleted by clicking
Remove
. Click
Clear points
to remove all the manual focus points.
Figure 35. Focus mode