PANNORAMIC® SCAN RX 1.0
SCANNING MODES AND SETTINGS
MAY 13, 2021
106
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
5.3.2
General Functions at the Magazine Menu
Rack view mode selector
Switch view by clicking the
button. Click
to add a virtual magazine to the planner,
and
to remove a virtual magazine from the planner.
Figure 99. Rack view mode selector
Profile management for selected magazine
includes the following global settings
applicable to all magazines:
•
Add current profile for all slides
•
Open profile to all slides
•
Detach current profile from all slides
•
Detach profiles from slides
•
Clear all slide results
5.3.3
General Functions at the Slide Menu
•
Mark empty slide positions
–
Define range in the
Range to skip
boxes to set multiple slide
positions as empty. For a single slide, enter / set slide position with the arrows in the
Range to skip
box or right-click on a slide and select
Skip
.
Figure 100. General functions at the slide menu
•
Click
Reset
at the Slides settings bar to cancel slide selections as empty, or right-click the
thumbnail of a slide selected as skipped and click
Reset
.
•
You can apply a selected profile to a defined range of slides at the
Profile range
section.
Set the slide positions within the range (first and last slide) then click
.