PANNORAMIC® SCAN RX 1.0
SETTINGS AND SERVICES
MAY 13, 2021
128
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES .
On this panel, you can define which filters occupy which turret positions.
o
The actually set filter position is marked at the
Current filter hardware position
field.
o
Select filter hardware positions from the
Filter hardware position:
drop-down list.
Notice:
The maximum number of virtual filters is 50 if you insert Penta filters (and this type is
selected from the
Filter type
list) in the available 10 filter positions in the turret.
o
Move filter wheel to insert position.
o
Enable position.
Notice:
Whenever a selected physical filter is disabled, the filter itself must be removed from the
turret.
o
Select
Filter type
,
Filter channel
, and
Filter name.
o
Check
Available for scanning.
o
Set
Lumencor LED light source
, set
Excitation
and
Emission wavelength
/
bandwidth
values for the selected filter.
o
Set
Pseudo-color.
o
Select channels used for grayscale conversion.
o
Select
Enable Lumencor hardware trigger.
Click
Save
to save settings.