Pannoramic MIDI II 2.0.5 User’s Guide
3 Preparing Slides and Trays
3 Preparing Slides and Trays
This section demonstrates how to prepare slides and trays. You may use slides and coverslips that
meet the following specifications:
Slides
Coverslips
Length
75.0 to 76.0 mm
max. 50 mm
Width
25.0 to 26.0 mm
max. 24 mm (recommended: 22 mm)
Thickness
0.9 to 1.2 mm
No. 1 and No. 1.5 (0.13 to 0.16 mm and 0.16 to 0.19 mm)
Corners
45° beveled corners
Edges
Polished or cut
Warning!
Always wear personal protective equipment (safety goggles, gloves and
coat) when working with biohazardous material or slides.
Warning!
Do not use a slide when it is broken or its edges are not properly cut or
grounded. Using such slides can lead to injury.
Warning!
Ensure that no part of the mounted coverslip protrudes from the edges
of the slide.
Use slides with completely dried embedding medium only. Otherwise,
the coverslip can be shifted that makes slide loading less reliable. Not
completely dried embedding might also influence the operation of
objectives and other device parts.
December 7, 2018 – Rev. 1
3DHISTECH Ltd.
27(144)