3D Histech Pannoramic MIDI II 2.0.5, User Manual, Page: 109 / 144

Pannoramic MIDI II 2.0.5 User’s Guide 5.6.1 Settings
If you define parameters in the Parameters field, it will pass them to the software that it
starts. If no parameter is defined, then the parameter will not be passed. The default
parameters are the following:
•
For Slide scanning has finished :
"
<SLIDENAME>
"
– transfers the slide
name
•
For Scanning error has occurred :
"
<ERRORTEXT>
"
– transfers the
error message
Run defines the window mode that the external application will start in. The following
window modes can be set:
•
Normal window
•
Minimized
•
Maximized
You can test whether the Scanning Error Occurred settings work by clicking .
In the Message Call section of the window complex messaging functions can be defined.
Here you can setup parameters of the mail server, add or remove users, and also set the
message body in the Message subject field by entering a text for example, to inform
recipients on the location of the scanner, or the slide set you are working with.
Click to test settings (by sending an e-mail to the address defined in the E-mail To field)
after you have finished to check their relevancy before applying them.
First click SMTP setup to display the E-mail settings window, in which you can dedicate an e-
mail server through which the software sends e-mails to the selected recipients.
Figure 78 – Messenger Setup window
In the Messenger Setup window the following parameters can be set:
•
Message Type – E-mail
•
Host Address
•
Port
December 7, 2018 – Rev. 1 3DHISTECH Ltd. 109(144)