Pannoramic MIDI II 2.0.5 User’s Guide
2.4 Coupling the Lumencor Spectra 6 unit
with the scanner
2.4 Coupling the Lumencor Spectra 6 unit with the scanner
To operate the Lumencor Spectra 6 Light Engine fluorescent illumination unit, it has to be attached to
the Pannoramic MIDI II base unit, and connected to the camera, and the control computer with
cables.
1. Turn the control computer and the pco.edge 4.2 camera off.
2. Attach Lumencor SPECTRA 6 fluorescent illumination unit to the coupling adapter of the
Pannoramic MIDI II scanner (see
Figure
2 – option B
).
3. Connect power supply cables both of the scanner and the illumination unit.
4. Connect TTL trigger cable between pco.edge 4.2 camera (out 4) or Point Grey Grasshopper 3
camera and the Lumencor SPECTRA 6 unit (TTL port), and USB-to-RS232 communication
cable between the Lumencor SPECTRA 6 unit and the computer.
Figure 5 – Lumencor SPECTRA 6 Light Engine connecting ports
2.5 External power supply unit
For the proper operation of the scanner, the
SINPRO – MPU101-108
24V external power supply unit
must be connected between the mains power and the device.
Front panel:
(1) main power switch
(2) power supply connector
Back panel:
(3) detachable power cord to connect the external power supply unit with the main unit
December 7, 2018
3DHISTECH Ltd.
25
(
144
)