3D Histech Pannoramic MIDI II 2.0.5, User Manual, Page: 113 / 144

Pannoramic MIDI II 2.0.5 User’s Guide 5.6.2 Services
Note:
If Lumencor SPECTRA 6 is configured as illumination unit, the
corresponding Enable Lumencor hardware trigger option is displayed
on the Filter settings form.
◦
Stitching overlap – Set the amount how much the FOVs should extend over
◦
Measure camera rotation – Camera rotation angle is measured
◦
Alpha blending – The two images are blended
◦
Lower image position – Moves the upper image sideways in distinctive steps
◦
Reset all camera rotation – Click this button to set camera rotation values to default.
Save settings by clicking .
•
– Filter settings
December 7, 2018 – Rev. 1 3DHISTECH Ltd. 113(144)