3D Histech Pannoramic MIDI II 2.0.5, User Manual, Page: 114 / 144

Pannoramic MIDI II 2.0.5 User’s Guide 5.6.2 Services
On this panel you can define which filters occupy which turret positions.
◦
Select filter hardware positions from the drop-down list
◦
Move filter wheel to insert position
◦
Enable position
Note:
Whenever a selected physical filter is disabled, the filter itself must be
removed from the turret.
◦
Select Filter type , Filter channel , and Filter name
◦
Check Available for scanning
◦
Set Lumencor LED light source , set Excitation and Emission wavelength / bandwidth
values for the selected filter.
◦
Set Pseudo-color
◦
Select channels used for grayscale conversion
◦
Select Enable Lumencor hardware trigger
Click Save to save settings.
•
– Z-difference
This function is available only for fluorescence settings; it enables you to set the basic focus
differences between the filters. This facilitates more precise focusing during scanning.
December 7, 2018 – Rev. 1 3DHISTECH Ltd. 114(144)