3Com REMOTE ACCESS SYSTEM 1500, Management Manual

Page: 112 / 300

110 C
HAPTER
7: LAN-
TO
-LAN R
OUTING
set user main _office phone_number 5085556666
8 Configure authentication.
set ppp receive_authentication pap
set system transmit_authentication_name branch_office
9 Save your work.
save all
Configuring IP on
Demand
Using IP on demand, the RAS 1500 sends IP packets it receives to
specified routers. Use the following steps to configure the RAS 1500 for
IP on demand:
add user [username] password [password] type network,dial_out
network_service ppp enabled no
set network user [username] ip_routing both
set user [username] phone_number [phone number]
set user [username] alternate_phone_number [phone number]
set system transmit_authentication_name [authentication name]
set network user [username] send_password [password]
set network user [username] ppp max_channels 2
add modem_group [modem group name] interfaces rm0/mod:[5-6]
set user [username] modem_group [modem group name]
set ip network [network name] routing_protocol ripv1
set network user [username] remote_ip_address [ip address]
set dial_out user [username] site type ondemand
set user [username] idle_timeout 60
set dial_out user [username] site spoofing enable
enable user [username]
save all