3Com REMOTE ACCESS SYSTEM 1500, Management Manual

Page: 65 / 300

Configuring the RAS 1500
63
For example, to add a modem group called Telnet_users with three
modems assigned to it:
add modem_group telnet_users interface
rm0/slot:1/mod:1,rm0/slot:1/mod:2,rm0/slot:1/mod:3
After you create the modem group, you assign it to the dial-out service
(in step four). The modem group you assign in that step must match
exactly (case-sensitive) with the modem group you create in this step.
Step Four: Add the
Dial-out Service
1 Add the Telnet dial-out service. Use the following command:
add network service <service name>
server_type <server type>
socket <socket number>
data <ancillary data>
Table 9 Network Service Parameters
Parameter Description
network service name
Name of the service. Limit: 64 ASCII characters.
server type
Designates the type of service, which in this case is
telnetd
.
socket number
Port on which the server monitors for activity. This
parameter should be higher than 1024 to avoid
conflicts with existing socket numbers.