3Com REMOTE ACCESS SYSTEM 1500, Management Manual

Page: 33 / 300

Configuration with the CLI
31
Step Six: Configure
SNMP - Optional
The following section configures SNMP service. If you do not wish to set
up SNMP, skip to “Step Seven: Save Your Work”.
If you plan to use an SNMP application to configure and manage the RAS
1500, you must specify SNMP community values. SNMP community
names segregate administrative management groups and should match
the community settings of your generic SNMP software.
You must set the following SNMP community values:
■
name — community name
■
address — IP address of the Windows SNMP manager
■
access — either read-only, read-write or administrator (read and
write) access
For a public community with read-only privileges, assign the address to
any station (0.0.0.0.).
To add the SNMP community values, enter the following:
add snmp community <name>\
address <IP address>
access [RO | RW | ADM]
Example:
add snmp com mis add 192.77.202.30 acc adm
Command keywords can be abbreviated, as long as they are unique to
the command.
Step Seven: Save
Your Work
Save your work.
save all