Dialing Out From a Network Computer
67
Dialing Out From a
Network Computer
1
From the Windows 95 or NT desktop, click
Start
, then
Run
. The Run
dialog box appears.
2
In the Open text box, enter the following:
telnet <ip address of the RAS 1500> <socket number>
Example:
telnet 192.112.227.115 6666
3
Click
OK
. The Telnet application is launched.
4
At the login prompt, type the user name, then press Enter.
5
At the password prompt, type the user password, then press Enter. The
RAS 1500 authenticates the user.
6
At the command prompt, issue
AT
commands to the modem.
Case Study
This section provides a step-by-step example of configuring the RAS 1500
and network computers for Telnet dial-out.
A user on the network, Eddie, wants to dial out through the RAS 1500
using Telnet.
This example assumes the following:
■
Eddie uses a Windows 95 computer.
■
Analog I/O cards are installed in the RAS 1500.
■
All basic system and network configuration is complete.
To configure network dial-out service, follow these steps:
1
Access the RAS 1500 CLI.
2
Name the system “ras1500_north.” Use the following command:
set system name ras1500_north
3
Specify an IP network named “ipnetwork” with an IP address of
149.112.152.195. Use the following command:
add ip network ipnetwork address 192.112.227.110
4
Add a modem group named “telnet_lan” that uses modems 1 and 2 on
slot 0. Use the following command:
Summary of Contents for REMOTE ACCESS SYSTEM 1500
