3Com REMOTE ACCESS SYSTEM 1500, Management Manual

Page: 167 / 300

Communicating with Remote and Local Sites
165
Using the
list services
command after typing the example above
will display the following (for example):
CONFIGURED NETWORK SERVICES
Server Admin
Name Type SocketClose Status
tftpd TFTPD 69 FALSE ENABLED
DATA:
dialout DialOut32773FALSE DISABLED
DATA: auth=off, login_banner= “Welcome to My Net”,
login_prompt=“My Session,drop_on_hangup=on
telnetd TELNETD23FALSE ENABLED
DATA:
TELNET server TELNETD99FALSE DISABLED
DATA:”
enabled
When you add a network service, it is enabled by default.
When changing any parameter, you must first disable the service then
re-enable it.
Example (abbr.):
set network service “telnet user” server_type telnetd data
“auth=off” enabled yes
server_type Type of service being offered: ClearTCPd, Dialout, SNMPd,
Telnetd, TFTPd).
socket Sets the port number the RAS 1500 listens on for network
service requests.
Enabling and Disabling Network Service
By default, the network service is enabled when you add it. To edit the
service, you must first disable it:
disable network service <service_name>
To enable network service:
enable network service <service_name>
Deleting a Network Service
To delete a network service:
delete network service <service_name>