3Com REMOTE ACCESS SYSTEM 1500, Management Manual

Page: 75 / 300

Configuring RAS 1500
73
Step One: Configure
an IP Address Pool
Use the following steps to configure an IP address pool:
1 Designate an IP address pool name and initial pool address. Use the
following command:
add ip pool <name> initial_pool_address
<initial_pool_address>
Example:
add ip pool kurtspool initial_pool_address 172.32.142.2
Do not overlap the ip addresses of the IP address pool and DHCP pool.
2 Configure the size of the IP address pool. Use the following command:
set ip pool <name> size [1-4096]
Example:
set ip pool kurtspool size 24
3 Configure the state of the IP address pool. Use the following command:
set ip pool <name> [public |private]
Example:
set ip pool kurtspool public
4 Configure the IP address pool route.
Use the following command:
set ip pool <name> route [aggregate | no_aggregate]
Example:
set ip pool kurtspool route aggregate
Table 11 IP Pool Access
User Type Parameter
All users
public
Specific users
private
Table 12 RAS 1500 Routing Table Actions
RAS 1500 Action Parameter
Add a network route to the Routing Table immediately, and
advertise it as a single network route.
aggregate
Add a network route to the Routing Table only when a user dials
into that IP address pool. (default)
no_aggregate