3Com OfficeConnect WX4400, Reference Manual

Page: 512 / 528

512 C
HAPTER
B: C
HANGING
3WXM S
ERVICES
P
REFERENCES
5 To change settings for client-session data collection:
a Select Enable Client Session Collection . This option is enabled by
default.
b To change the number of minutes between data queries, change the
value in the Polling interval box. You can specify 5, 10, or 15 minutes.
The default is 5 minutes.
6 To change settings for traffic and RF data collection:
a Select Enable Traffic & RF Trending . This option is enabled by
default.
b To change the number of minutes between data queries, change the
value in the Polling interval box. You can specify 5, 10, or 15 minutes.
The default is 5 minutes.
c To change the RF Threshold Settings , enter new settings for the
following statistics [default settings are indicated in brackets]:
„
Radio Retransmit Threshold (%) [10]
„
Radio Noise Floor Threshold (dBm) [-85]
„
Radio Signal Level Threshold (dBm) [-75]
„
Utilization Threshold (%) [80]
„
SNR Threshold (dBm) [15]
„
Number of Clients per Radio [15]
7 To change settings for Intrusion Detection System (IDS) and Denial of
Service (DoS) data collection:
a Select Enable Rogue Detection . This option is enabled by default.
b To change the number of minutes between data queries, change the
value in the Polling interval box. You can specify 5, 10, 15, or 30
minutes. The default is 5 minutes.
8 Click Save to save the changes.