3Com OfficeConnect WX4400, Reference Manual

Page: 180 / 528

180 C
HAPTER
6: C
ONFIGURING
WX S
YSTEM
P
ARAMETERS
Use this option when you are creating a new switch in 3WXM. This
option modifies the password in the network plan. However, if the switch
is already deployed in the network, 3WXM cannot apply configuration
changes to the switch unless the enable password in 3WXM matches the
enable password already configured on the switch.
9 To change the Mobility Domain membership for the switch, select the
Mobility Domain from the Mobility Domain drop-down list.
To leave the switch out of all Mobility Domains, select Not Assigned.
10 To change the wiring closet membership for the switch, select the closet
from the Wiring Closet drop-down list.
To leave the switch out of all wiring closets, select Not Assigned.
11 Click Save .
Changing the WX
Software Version
To change the WX software version:
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the WX switch.
3 In the Task List panel, select Software Version.
The Change Software Version wizard appears.
4 Select the software version from the drop-down list.
5 Click OK .
Changing the WX
Model
To change the WX model:
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the WX switch.
3 In the Task List panel, select Model.
The Change Model wizard appears.
4 Select the model from the drop-down list.
5 Click OK .