3Com OfficeConnect WX4400, Reference Manual

Page: 177 / 528

Setting Up a Switch 177
„
Authenticated —SNMP message exchanges are authenticated but
are not encrypted. (This security level is the same as the authNoPriv
level described in SNMPv3 RFCs.)
„
Encrypted —SNMP message exchanges are authenticated and
encrypted. (This security level is the same as the authPriv level
described in SNMPv3 RFCs.)
f Click Next .
g Type the USM name or community string name in the corresponding
box.
h Select the access type from the Access Type drop-down list:
„
read-notify —An SNMP management application using the string
can get object values on the switch but cannot set them. The
switch can use the string to send notifications.
„
notify-only —The switch can use the string to send notifications.
„
read-write-notify —An SNMP management application using the
string can get and set object values on the switch. The switch can
use the string to send notifications.
i Click Next .
8 Configure VLANs.
VLANs that already exist, such as the default VLAN, are listed. You can
modify existing VLANs and create new ones.
To create a VLAN:
a Click Create . The Create VLAN wizard appears.
b See “Viewing and Configuring VLANs” on page 215.
c When you are finished configuring VLANs, click Next and go to
step 9.
9 Configure RADIUS servers and server groups.
RADIUS servers that are already configured are listed. You can modify
existing servers and groups and create new ones.
To create a RADIUS server and place it in a group:
a Click Create . The Create RADIUS Server wizard appears.
b See “Viewing and Configuring RADIUS Settings” on page 311.
c When you are finished configuring RADIUS settings, click Next and go
to step 10.