3Com OfficeConnect WX4400, Reference Manual

Page: 367 / 528

Synchronizing Local and Network Changes 367
To immediately deploy local changes
1 Select the Devices tool bar option.
2 At the bottom of the Task List panel, select Change Management.
3 Select one or more WX switches.
To select multiple switches, press Shift (for contiguous switches) or
Control (for noncontiguous switches) while clicking.
4 In the Local Changes group in the Task List panel, click Deploy . The
Deploy Configurations dialog box appears.
The dialog lists the switches that have configuration changes.
5 Select the switches to which you want to deploy the changes.
To select more than one WX, click Shift while clicking to select
contiguous items, or click Ctrl while clicking to select noncontiguous
items.
6 Click Deploy .
The deployment status for each affected WX is shown in the History
window at the bottom left of the dialog box.
3WXM performs verification of the changes. If errors occur, they are
listed in the Selected Errors at the bottom right of the dialog box. If there
are errors, fix them and verify the changes before trying to deploy again.
(You can use the Verification tab to fix the errors. See “” on page 377.)
If the deploy is successful, 3WXM also instructs the WX switch to save the
changes in its configuration file.
7 Click Close .
You can click Close at any time after clicking Deploy . The operation
continues in the background. To review the status of the operation, use
the operation log. (See “Viewing the Operation Log” on page 373.)
To schedule deployment of local changes
1 Select the Devices tool bar option.
2 At the bottom of the Task List panel, select Change Management .
3 Select one or more WX switches.
To select multiple switches, press Shift (for contiguous switches) or
Control (for noncontiguous switches) while clicking.