3Com 3C63400-3AC-C - PathBuilder S700 Switch, Reference Manual

Page: 256 / 272

242 C
HAPTER
6: P
ATH
B
UILDER
S700 D
IAGNOSTICS AND
P
ERFORMANCE
M
ONITORING
Row 2 (left to right)
rcvd from —number of cells received on side A per port or group
dropped —number of cells dropped on side A due to queue congestion or early
packet discard (EPD).
rcvd from —number of cells received on side B per port or group
dropped —number of cells dropped on side B due to queue congestion or early
packet discard (EPD).
3 To view additional information about a particular circuit, enter the desired virtual
circuit number to display the Virtual Circuit Statistics Detail screen for that circuit.
Figure 179 shows a representative Virtual Circuit Statistics Detail screen.
Figure 179 Show Virtual Circuits Detail Window
The Virtual Circuit Statistics Detail screen displays the following statistics:
For further details about conforming CLPO+CLP1 and non-conforming CLP1+CLP0
cells, see “Conforming/Non-Conforming Cell Counters” later in this section.
Received —Total number of cells received (conforming CLPO+CLP1 and
non-conforming CLP1+CLPO cells).
Conf CLP0 —Ingress CLPO; the number of conforming CLP=0 cells received.
ConfCLP1 —Ingress CLP1; the number of conforming CLP=1 cells received.
Nonconf CLP0 —Number of non-conforming CLP=0 cells received. This
counter is used only with Policing enabled.
NonconfCLP1 —Number of non-conforming CLP=1 cells received. This counter
is used only with Policing enabled.
Dropped (due to congestion) —Number of cells dropped due to queue
congestion or EPD (early packet discard).
Sent —Total number of cells sent (total of CLP0 + CLP1 cells).
CLP0 —Total number of CLP=0 cells sent.
CLP1 —Total number of CLP=1 cells sent.
Last Cleared —Date and time that the statistics were last cleared.