ZyXEL Communications OLT2406 Скачать руководство пользователя страница 672

Страница: 672 / 766

Chapter 96 Remote ONT

OLT2406 User’s Guide

672

exit

Leaves from the configuration commands.

remote ont <

aid

> check-version

Checks the ONT version and performs software
download.

aid: ont-<slot>-<pon>-<ont> | pon-

Up to three ONTs can upgrade firmware via the
OLT at the same time.

The standby firmware of the ONT will be
updated when the ONT is downloading
firmware via the OLT.

One of the following results appears:

•

MATHCED

: The ONT’s planned version and

running firmware version are identical.

•

Downloading

: The ONT is downloading the

latest firmware from the OLT. The image

version of the ONT firmware file uploaded to

the OLT and the ONT’s planned version are

identical.

•

Failed

: The ONT didn’t upgrade firmware

successfully.

•

Failed with ONU Down

: The ONT didn’t

upgrade firmware successfully, because the

optical network of the ONT is down.

•

Not found the matching image

: The ONT

didn’t upgrade firmware successfully,

because the image version of the ONT

firmware file uploaded to the OLT and the

ONT’s planned version are not identical.

•

No planned version

: The ONT’s planned

version hasn’t configured yet.

•

Timeout

: The ONT didn’t upgrade firmware

successfully, because there was no response

from the OLT.

•

ONU not ready

: The ONT didn’t upgrade

firmware successfully, because the ONT is

not ready.

•

SWDL queue full

: The ONT didn’t upgrade

firmware successfully, because the waiting

queue is full.

•

In waiting queue

: The ONT is in the waiting

queue, and waiting for the firmware

upgrade process to begin.

•

Change to image(1)

(2)

: Image 1/2 is in use

now for the ONT’s running firmware,

because the ONT’s planned version and

image 1/2 firmware version are identical.

•

No Image

: No ONT firmware file is uploaded

to the OLT.

•

Already successful

: This message only

appears when you’re checking the ONTs

firmware upgrades status of the specified

port. An ONT has already upgraded

firmware successfully.

•

Already changed to image (1)

(2)

: This

message only appears when you’re

checking the ONTs firmware upgrades status

of the specified port. Image 1/2 is in use now

for the ONT’s running firmware, because the

ONT’s planned version and image 1/2

firmware version are identical.

COMMAND

DESCRIPTION

Содержание OLT2406































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OLT2406

Отзывы:

Бренды по названию

Популярные бренды

ZyXEL Communications OLT2406, Руководство пользователя

Результаты поиска

Содержание OLT2406

Отзывы:

Бренды по названию

Популярные бренды