manualshive.com logo in svg

ZyXEL Communications OLT2406, Руководство пользователя

Поделиться
Скачать
ZyXEL Communications OLT2406 Скачать руководство пользователя страница 229

 Chapter 27 IP Source Guard

OLT2406 User’s Guide

229

Write delay timer

This field displays how long (in seconds) the OLT tries to complete a specific update in 
the DHCP snooping database before it gives up.

Abort timer

This field displays how long (in seconds) the OLT waits to update the DHCP snooping 
database after the current bindings change.

This section displays information about the current update and the next update of the 
DHCP snooping database.

Agent running

This field displays the status of the current update or access of the DHCP snooping 
database.

none

: The OLT is not accessing the DHCP snooping database.

read

: The OLT is loading dynamic bindings from the DHCP snooping database.

write

: The OLT is updating the DHCP snooping database.

Delay timer expiry

This field displays how much longer (in seconds) the OLT tries to complete the current 
update before it gives up. It displays 

Not Running

 if the OLT is not updating the DHCP 

snooping database right now.

Abort timer expiry

This field displays when (in seconds) the OLT is going to update the DHCP snooping 
database again. It displays 

Not Running

 if the current bindings have not changed 

since the last update.

This section displays information about the last time the OLT updated the DHCP 
snooping database.

Last succeeded time

This field displays the last time the OLT updated the DHCP snooping database 
successfully.

Last failed time

This field displays the last time the OLT updated the DHCP snooping database 
unsuccessfully.

Last failed reason

This field displays the reason the OLT updated the DHCP snooping database 
unsuccessfully.

This section displays historical information about the number of times the OLT 
successfully or unsuccessfully read or updated the DHCP snooping database.

Total attempts

This field displays the number of times the OLT has tried to access the DHCP snooping 
database for any reason.

Startup failures

This field displays the number of times the OLT could not create or read the DHCP 
snooping database when the OLT started up or a new URL is configured for the DHCP 
snooping database.

Successful transfers

This field displays the number of times the OLT read bindings from or updated the 
bindings in the DHCP snooping database successfully.

Failed transfers

This field displays the number of times the OLT was unable to read bindings from or 
update the bindings in the DHCP snooping database.

Successful reads

This field displays the number of times the OLT read bindings from the DHCP snooping 
database successfully.

Failed reads

This field displays the number of times the OLT was unable to read bindings from the 
DHCP snooping database.

Successful writes

This field displays the number of times the OLT updated the bindings in the DHCP 
snooping database successfully.

Failed writes

This field displays the number of times the OLT was unable to update the bindings in the 
DHCP snooping database.

Database detail

First successful access This field displays the first time the OLT accessed the DHCP snooping database for any 

reason.

Table 83   Advanced Application > IP Source Guard > DHCP Snooping (continued)

LABEL

DESCRIPTION

Содержание OLT2406































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды