MANAGING INFUSION
46
Z-800F Instructions for Use
P/N 800F-IFU-2602, Rev. O
SAVE INFUSION PARAMETERS AS PROTOCOL
Turn on the pump; Select NEW INFUSION; Program an
infusion.
Example:
1.
Select
10 STEP MODE.
Program a 10 Step infusion with
the following parameters.
STEP 1:
RATE=50ml/h, VTBI=25ml.
STEP 2:
RATE=100ml/h, VTBI=50ml.
STEP 3:
RATE=150ml/h, VTBI=75ml.
STEP 4:
RATE=200ml/h, VTBI=100ml.
STEP 5:
RATE=250ml/h, VTBI=250ml.
2.
From the 10 STEP Programming screen, press the
CONFIG
key to access CONFIG screen. Select
3.
SAVE
PROTOCOLS
.
3.
Select one of the 8 protocols to be used to store the
infusion parameters. Enter the name to be used for the
protocol.
Use the
or
key to scroll through letters a
through z.
Use the
or
key to scroll through letters A
through Z.
Use the
or
key to scroll through digits 0
through 9, SPACE and other special characters.
Use the Up/Down Arrow to move the cursor back and
forth.
4.
Press
SAVE
key to associate the current programmed
infusion parameters with the protocol name as entered.
NOTE: Loading factory default settings will delete all
saved protocols. (Refer to Maintenance->Configurable
settings->Load default on how to load factory default).