Zurich 56218, Руководство пользователя

Страница: 89 / 101

Additional Tests
BATTERY/ALTERNATOR MONITOR
For technical questions, please call 1-888-866-5797.
87
9.
When the battery check is complete, a
results screen displays the battery
status. The System Status LEDs provide
a PASS/FAIL indication, as follows:
n
Green = Good
n
Yellow = Normal
n
Red = Warning/Bad
10.
Choose Main Menu to return to the Main
Menu.
To perform a charging system check:
1.
Press M and release.
n
The Main Menu displays.
2.
Select Battery/Alternator Monitor ,
then press ENTER .
n
The Battery/Alternator Monitor Menu
displays.
3.
Select Alternator Monitor , then press ENTER .
n
An “instructional” message shows.
4.
Start and warm the engine to normal operating temperature. Turn on
the headlights. Choose
Continue to proceed.
n
An “instructional” message shows.
5.
Press the accelerator pedal to raise engine speed to 2000 RPM, and
maintain the engine speed.
n
When engine speed is within the required range, the alternator
test begins. A progress screen shows.
n
When the “countdown” timer expires, an “instructional” message
shows.
6.
Turn the vehicle’s headlights off, and
return the engine to idle speed.
n
A “One moment please…” message
displays while the test results are
retrieved.
7.
When the alternator check is complete,
a results screen shows charging system
voltage and indicates whether or not the
charging system is within acceptable
limits. The System Status LEDs provide
a PASS/FAIL indication, as follows:
n
Green = System within limits
Yellow = Over charging or under
charging