Zurich 56218 Скачать руководство пользователя страница 45

Страница: 45 / 101

Additional Tests

SYSTEM/ACTUATOR TESTS

For technical questions, please call 1-888-866-5797.

Select

Injector Kill System Test

in the Special Functions menu, then

press

ENTER

An “instructional” screen displays. Prepare the vehicle for test as

directed.

- Start and idle the engine.

- Make sure engine coolant temperature is 83°C (180°F) before

proceeding.

Choose

Yes

to continue.

A “status” screen displays while a vehicle status check is

performed.

The Select Injector screen displays.

Select the desired injector, then press

ENTER

The test results screen displays.

The screen shows the

Injector Kill

Routine Results

and the current

Engine Speed

If desired, choose

Reselect

to return to

the Select Injector screen, and repeat

step 3 to select a new fuel injector.

Choose

Finish

to return to the Special

Functions menu.

Injector Kill System Test (002)

The Injector Kill System Test function lets you perform a test of the

injector kill system for a selected fuel injector.

Select

Injector Kill System Test

in the Special Functions menu, then

press

ENTER

An “instructional” screen displays. Prepare the vehicle for test as

directed.

- Start and idle the engine.

- Make sure engine coolant temperature is 83°C (180°F) before

proceeding.

Choose

Yes

to continue.

A “status” screen displays while a

vehicle status check is performed.

The Select Injector screen displays.

Select the desired injector, then press

ENTER

The test results screen displays.

Содержание 56218






































































































Результаты поиска

Содержание 56218

Отзывы:

Похожие инструкции для 56218

Бренды по названию

Популярные бренды

Zurich 56218, Руководство пользователя

Результаты поиска

Содержание 56218

Отзывы:

Похожие инструкции для 56218

Бренды по названию

Популярные бренды