Zurich 56218, Руководство пользователя

Страница: 32 / 101

Additional Tests
SYSTEM/ACTUATOR TESTS
30
For technical questions, please call 1-888-866-5797.
Set Throttle Blade Position
1.
Select Set Throttle Blade Position in the Special
Functions menu, then press ENTER .
n
An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2.
Choose Yes to continue.
n
A “status” screen displays while a vehicle status check is
performed.
n
The Select Position screen displays.
3.
Select Normal , Closed , Open or the
desired percentage (from 10% to 90% ),
then press ENTER .
n
The Test Results screen displays.
n
The screen shows the current values
for APP 1 Volts , APP 2 Volts , TPS
1 Volts , TPS 2 Volts , TPS 3 Volts ,
TPS 4 Volts , Throttle Blade 1
Position and Throttle Blade 2
Position .
4.
If desired, choose Reselect to return to the Select Position screen,
and repeat step 3 to select a new throttle blade position.
5.
Choose Finish to return to the Special Functions menu.
Throttle Learn Mode
1.
Select Throttle Learn Mode in the Special Functions menu, then
press ENTER .
n
An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Turn the ignition on. DO NOT start the engine.
2.
Choose Yes to continue.
n
A “status” screen displays while a vehicle status check is
performed.
3.
A “confirmation” screen displays when the learn routine begins.
n
A series of “instructional” screens display while the procedure is
in progress. Perform the following when prompted:
- Press and hold the accelerator pedal.
- Release the accelerator pedal.
n
mA “results” screen displays when the learn procedure has
completed.
4.
Choose Finish to return to the Special Functions menu.