Zurich 56218, Руководство пользователя

Страница: 65 / 101

Additional Tests
SYSTEM/ACTUATOR TESTS
For technical questions, please call 1-888-866-5797.
63
n
The test repeats through a total of 4 stages.
n
A “confirmation” screen displays when each testing stage is
complete. Choose Continue to proceed.
- If conditions are out-of-range for idle
air control, or if a possible failure is
detected for any stage, an
“advisory”
message displays.
Choose Back to return to the Active
Test menu.
5.
When all stages of the test are complete,
a final “confirmation” screen displays.
n
Choose Back to return to the Active
Test menu.
EVAP Test
The EVAP Test function lets you test the vehicle’s Evaporative (EVAP)
Emissions System. You may choose to perform a SINGLE SOLENOID
test, MULTI SOLENOID test, or FUNCTION TEST .
To access the EVAP Test function:
n
Select EVAP Test in the Active Test
menu, then press ENTER .
- The EVAP TEST menu displays.
To perform the SINGLE SOLENOID test:
1.
Select SINGLE SOLENOID in the EVAP TEST menu, then press
ENTER .
n
An “instructional” screen displays. Prepare the vehicle for test as
directed:
- Make sure the battery is fully charged.
- Turn the ignition on. DO NOT start the engine.
2.
Choose Continue to proceed.
n
The Select Test screen displays.
3.
Select the desired test, then choose
Continue .
n
A “status” screen displays while the
test is in progress.
n
The screen shows the EVAP TEST
selected, the FPT Sensor pressure,
the EVAP PC Duty cycle, and the
EVAP CVS Valve status.