Zurich 56218, Руководство пользователя

Страница: 5 / 101

Scan Tool Controls
DISPLAY FUNCTIONS
For technical questions, please call 1-888-866-5797.
3
9.
DOWN button - When in MENU mode, scrolls DOWN through
the menu options. When LINKED to a vehicle, scrolls DOWN through
the current display screen to display additional data.
10.
Left Option Button - Selects the associated option shown on the
display (Yes/No, Previous/Next, etc).
11.
Right Option Button - Selects the associated option shown on the
display (Yes/No, Previous/Next, etc).
12.
GREEN LED - Indicates that all engine systems are running normally
(all Monitors on the vehicle are active and performing their diagnostic
testing, and no DTCs are present).
13.
YELLOW LED - Indicates there is a possible problem. A “Pending”
DTC is present and/or some of the vehicle’s emission monitors have
not run their diagnostic testing.
14.
RED LED - Indicates there is a problem in one or more of the vehicle’s
systems. The red LED is also used to show that DTC(s) are present.
DTCs are shown on the Scan Tool’s display. In this case, the
Malfunction Indicator (“Check Engine”) lamp on the vehicle’s
instrument panel will light steady on.
15.
Display - Color LCD display shows menus and submenus, test
results, Scan Tool functions and Monitor status information. See
DISPLAY FUNCTIONS , following, for more details.
16.
CABLE - Connects the Scan Tool to the vehicle’s Data Link
Connector (DLC).
DISPLAY FUNCTIONS
Figure 2. Display Functions
See Figure 2 for the locations of items 1 through 14, below.
1.
I/M MONITOR STATUS field - Identifies the I/M Monitor status area.