Zurich 56218 Скачать руководство пользователя страница 30

Страница: 30 / 101

Additional Tests

THE MAIN MENU – SYSTEM/ACTUATOR TESTS

For technical questions, please call 1-888-866-5797.

THE MAIN MENU

You can use the Scan Tool to perform additional diagnostic tests, view

diagnostic and vehicle information stored in the vehicle's on-board

computer, and configure the Scan Tool for your particular needs. These

functions are accessed through the Main Menu. The following functions

are available:

System/Actuator Tests

– Displays a

menu of system/actuator tests for the

vehicle under test, which lets you

perform active tests for various vehicle

actuators and systems.

Mode Tests

– Displays the System

Tests menu, which lets you retrieve and

view results for the O2 Sensor Test and

OBD Monitor Test, and initiate a test of

the vehicle’s EVAP system.

Vehicle Information

– Displays the Vehicle Info menu, which lets you

retrieve and view reference information for the vehicle under test.

Oil Reset

– Lets you reset the Oil Maintenance Light.

DLC Locator

– Lets you find the location of the Data Link Connector

(DLC) for a specified vehicle.

Battery Reset

– Lets you reset the battery monitor system after

battery replacement.

Battery/Alternator Monitor

– Performs a check of the vehicle’s

battery and alternator system to ensure the system is operating within

acceptable limits.

Drive Cycle Procedure

– Lets you view drive cycle procedures for a

selected vehicle monitor.

Steering Angle Sensor Calibration

– Lets you perform calibration

procedures for the vehicle’s Steering Angle Sensor (SAS).

Firmware Version

– Displays the Scan Tool’s firmware version.

Tool Library

– Displays the Tool Library menu, which provides

access to OBD1 and OBD2 DTC libraries and to definitions for

Monitor icons and LED indicators.

Tool Settings

– Displays the Tool Settings menu, which lets you

make adjustments and settings to configure the Scan Tool to your

particular needs.

The

System Tests

and

Vehicle Information

options are shown

only when the Scan Tool is in Global OBD2 mode.

SYSTEM/ACTUATOR TESTS

System/Actuator Tests let you perform active tests for various vehicle

actuators and systems. The specific tests available depend on the vehicle

make and model.

Содержание 56218






































































































Результаты поиска

Содержание 56218

Отзывы:

Похожие инструкции для 56218

Бренды по названию

Популярные бренды

Zurich 56218, Руководство пользователя

Результаты поиска

Содержание 56218

Отзывы:

Похожие инструкции для 56218

Бренды по названию

Популярные бренды