Zurich 56218 Скачать руководство пользователя страница 15

Страница: 15 / 101

Using the Scan Tool

VIEWING OEM ENHANCED DTCs (Ford/Mazda only)

For technical questions, please call 1-888-866-5797.

KOER

is selected, an advisory message shows.

- Start and warm the engine to normal operating temperature,

then choose

Continue

. Proceed to step

KOEO

Continuous Memory

is selected, an “instructional”

message shows.

Turn the ignition OFF, then back ON. Choose

Continue

. Proceed

to step

A “One moment please” message displays while the test is in

progress.

If the Scan Tool fails to link to the vehicle’s computer, a

“Communication Error” message shows.

- Ensure your vehicle is OBD2 compliant.

- Verify the connection at the DLC, and verify the ignition is ON.

- Turn the ignition OFF, wait 5 seconds, then back ON to reset

the computer.

- Choose

Relink

to try again, or, choose

System Menu

to return

to the System Menu.

If the Scan Tool

cannot

link to the vehicle’s computer after three

attempts, the message “Contact Technical Support” displays.

- Choose

System Menu

to return to the System Menu.

- Turn the ignition off, and disconnect the Scan Tool.

- Contact Technical Support for assistance.

If the

KOER

Test was selected, and the vehicle’s engine

is not

running, an advisory message shows.

- Start the engine and choose

Relink

to try again, or, choose

System Menu

to return to the System Menu.

If the

KOEO

Test was selected, and the vehicle’s engine

running

, an advisory message shows.

- Turn the ignition OFF then back ON and choose

Relink

to try

again, or, choose

System Menu

to return to the System Menu.

If the

KOER

test was selected, an “instructional” message shows.

Turn the steering wheel to the right, then release.

Press and release the brake pedal.

Cycle the overdrive switch (if equipped).

A “One moment please” message displays while the test is in

progress.

Refer to DISPLAY FUNCTIONS on page 3 for a description of LCD

display elements.

If the definition for the currently displayed code is not

available, an advisory message shows.

Содержание 56218






































































































Результаты поиска

Содержание 56218

Отзывы:

Похожие инструкции для 56218

Бренды по названию

Популярные бренды

Zurich 56218, Руководство пользователя

Результаты поиска

Содержание 56218

Отзывы:

Похожие инструкции для 56218

Бренды по названию

Популярные бренды