Zhejiang DVR300-08E, Руководство пользователя

Страница: 60 / 128

53
Steps Screenshot
3. Configure the PTZ protocol, address
code, and the serial port for PTZ control.
1)
Choose Menu > Camera .
2)
Select a channel from the video channel
list, and then click Set . The selected analog
channel must be in Enable state.
3)
On the Camera tab page, select a channel
of the PTZ camera, and configure the PTZ
protocol, the address code, and the serial
port for PTZ control. The parameters
displayed for analog channels, uniview
IPCs and third ‐ party IPCs are different, so
refer to the actual user interface for the
specific parameters.
Table 4 ‐ 3
Description of Major Configuration Parameters of a Camera
Configuration Type Parameter Description
Basic configuration
PTZ Auto
Release (s)
When the PTZ is not preempted by a user with a higher priority or
the current user does not exit the PTZ control toolbar, if the current
user who has the PTZ control permission does not operate the PTZ
within a certain time period, the PTZ is automatically released. Then
other users can obtain the permission to control the PTZ. This time
period is the PTZ automatic release time.
Camera
configuration
PTZ Protocol
PTZ protocol supported by the PTZ camera
Note:
For dome and half ‐ dome cameras, the PTZ protocol can be the
INTERNAL ‐ PTZ protocol only.