Zhejiang DVR300-08E, Руководство пользователя

Страница: 34 / 128

27
Configuring Encoding Parameters
Steps Screenshot
1. Right ‐ click anywhere in the preview
interface, and then choose Menu >
Camera .
The video channel interface is displayed.
2. Select the channel to be configured from
the video channel list, and then click Set .
The selected analog channel must be in
Enable state.
3. Configure encoding parameters.
Click the Encoding tab, select a channel from
the Channel Select drop ‐ down list box, and
configure encoding parameters. The
parameters displayed for analog channels,
uniview IPCs and third ‐ party IPCs are different.
For third ‐ party IPCs, you can only view but
cannot modify their encoding parameters.
The figure on the right shows the encoding
configuration of Uniview IPCs. For details about
important parameters, see Table 2 ‐ 5 .
The figure on the right shows the code
parameters for the analog channel. For details
about important parameters, see Table 2 ‐ 5 .
4. Click Ok . The configuration is saved.
-