ZETRON 4000 Series Скачать руководство пользователя страница 401

Страница: 401 / 418

401

Standard Functions

Volume

All-Mute

Pressing the All-Mute key causes all unselected channels to mute (be reduced in level).

When the mute is activated, all channel volume displays will be changed to yellow with no

volume level value. At the same time, a countdown timer is started and displayed in the

system message area. The timer indicates the amount of time before the all-mute condition

will be automatically removed. Pressing the All-Mute key while all-mute is active will

cause the mute to cancel, returning all channels to their previous audio levels.

Enhanced Volume

Pressing the Enhanced Volume key toggles the channel volume of the highlighted channel

between the standard volume level and another defined volume setting. When enhanced

volume is active, the volume indicator for the channel will blink.

Mute

Pressing the Mute key reduces the channel audio volume for the highlighted channel to the

value defined as the Mute Volume. Press the Mute key again to return the volume to its

original level.

Speaker/Headset

If the console includes an auxiliary headset (and associated jack-box), the user may select

where console audio is directed using the Spkr/Hdset key. When the headset is plugged in,

the key will indicate Hdset in the color black. At this time audio will be directed to the

headset. If the user would like to redirect audio to the console speakers without removing

the headset, press the Hdset key. The key will then indicate Spkr in the color yellow.

Volume Adjust

The Volume Adjust key allows the user to adjust channel volume using the FUNCTION

knob on the audio panel. Pressing the Volume Adjust key toggles it on or off. When the

Volume Adjust key is on (depressed) turning the FUNCTION knob will adjust the

currently highlighted channels volume.

Volume Up and Down

The volume of a channel, relative to the other channels, may be adjusted by using the

Volume Up and Volume Down keys. The percentage volume level is displayed in the

channel module. Each press of the Volume Up key increases the channel volume by 3%

and each press of the Volume Down key decreases the channel volume by 3%.

Содержание 4000 Series



































































































































































































































































































































































































































Результаты поиска

Содержание 4000 Series

Отзывы:

Похожие инструкции для 4000 Series

Бренды по названию

Популярные бренды

ZETRON 4000 Series, Руководство по установке

Результаты поиска

Содержание 4000 Series

Отзывы:

Похожие инструкции для 4000 Series

Бренды по названию

Популярные бренды