ZETRON 4000 Series, Руководство по установке

Страница: 291 / 418

291
System-Specific Definitions
If one or more radio groups are defined, selecting the SDC Call menu button displays, to
the console operator, labeled buttons for selection. When the operator clicks on one of the
radio group buttons, all SDC subscriber IDs that are associated to that group are displayed.
If no radio group labels are defined, all SDC subscriber IDs are displayed when the
operator selects the console iDEN Call menu button.
Assigning a Radio Group Label
The Radio Group Label can be one, two, or three 6-character words that are shown on the
console screen buttons for the radio group. See Figure 67 .
Figure 67: SDC Radio Group Definition Box
Defining MAP27 Radio Groups
MAP27 Radio groups associate similar MAP27 radios into a group that the console
operator can select. The Define Lists/Radio Groups/MAP27 Radio Groups menu displays
an entry form for assigning labels up to 10 radio groups. If one or more radio groups are
defined, selecting the Map27 Call menu button displays, to the console operator, labeled
buttons for selection.
When the operator clicks on one of the radio group buttons, all the MAP27 subscriber IDs
that are associated to that group are displayed. If no radio group labels are defined, all
MAP27 subscriber IDs are displayed when the operator selects the console MAP27 Call
menu button.
Note Due to current limitations for the SDC interface to the Series 4000
Dispatch console system, each SDC radio channel is limited to
supporting a single subscriber ID, therefore, each SDC radio
“group” will contain only a single subscriber ID.
Tip Navigate to this area from the main window in RDPS by clicking
Define Lists, Radio Groups, MAP27 Radio Groups .