ZETRON 4000 Series, Руководство по установке

Страница: 383 / 418

383
Description of Key Functions and Parameters
In a similar manner, each time you press the “CLOCK SET” key, another time unit will be
highlighted in the display, until the entire time and date have been set. The units are
adjusted starting with seconds, then minutes, hours, month, day, and finally year. The
display will automatically show the date once the three units of the time of day have been
set. You may distinguish a time display from a date display by the colon (:) units separator
used for time versus the slash (/) units separator used for date.
Channel Test
This key is for diagnostic use only. Pressing this key will cause all indicator LEDs to light
for any channel which is currently inoperable.
ANI Review
Because ANIs are received from various radios, they will be decoded and stored in a
“stack” in memory. The ANIs are reviewed and removed from the stack by repeatedly
pressing this key. The LED associated with this key will blink as long as an ANI remains
in the stack.
ANI Select
Pressing the ANI Select key will cause the channel that received the ANI showing in the
display to be “Selected”.
Paging Keys
Instant Call
An Instant Call key can have multiple pages (called a page stack) assigned to it. Each page
in the stack can be a different format (e.g., DTMF, Two-Tone, Alert) and be steered to
different channel(s).
Note
ANI Review only functions if the optional ANI software is installed
in the console.
Note ANI Select only functions if the optional ANI software is installed in
the console.
Note The “Instant Call” and “Page Safety” functions represent optional
features. They can always be programmed, but will generate an
error message in the console if the Instant Call Paging option has
not been installed.