ZETRON 4000 Series, Руководство по установке

Страница: 162 / 418

Console Installation
162 025-9533Y
Auxiliary Audio to Select Audio
The transmitted audio from the auxiliary audio input may be monitored at the position
over the console speaker. This is useful when an external encoder is used, so that the
operator can hear the encoder’s tones as they are being transmitted.
Auxiliary Audio Input Impedance
The auxiliary audio input is often used for connection to external encoders. To properly
match the output impedance of the encoder, the input impedance of the auxiliary audio
input may be set high or low.
Recorder Output and VU Meter
The audio recorder output and the VU meter are a summation of the console microphone
transmit audio and its select receive audio. Optionally, its unselect receive audio may be
added.
Model 4018/4118 Option Code Explanation
The series 4000 consoles can be shipped with options that deviate from the standard
operation. To determine what the option package is, refer to Table 67 .
The Model 4018 has a programming switch located on the bottom of the console. The
Model 4118 has a programming switch mounted on the back of the main unit. Position the
programming switch in the “program” position for approximately one second and then
return it to the normal run position while pressing the “#” key. As long as the “#” key is
held down, the option code will be displayed on the LCD. The option code will be
displayed in the upper left-hand corner on the first line of the display. The format is
“ OPT:xx ”. The “xx” are the options installed. Refer to Table 67 for a list of possible
options. If no option is present, the display will show “ OPT:- “.