Zero 88 SIRIUS 500, Руководство оператора

Страница: 23 / 119

Attribute Selection
The previously selected attribute is
automatically selected when
PROGRAM mode is entered. The
Memory Display shows (for example):
Program Mode.
Attribute Type:
BRIGHTNESS []
Select type & press}
To continue programming Brightness,
press the } key.
Memory No 1 []
User Info/Text
Select Mem & Press }
Press the { key to return to attribute
selection.
Program Mode.
Attribute Type:
BRIGHTNESS []
Select type & press}
Press and [ or ] key to select
Brightness, Colour, Beamshape,
Position, CueLine, SetUp, DMX Output
or DMX Patch.
Press the } key to enter once selected.
Memory No 1 []
User Info/Text
Select Mem & Press }
It is also possible to jump directly into
programming Brightness, Colour,
Beamshape, Position or CueLine
®
by
pressing the associated attribute
selection button situated to the right of
the wheels (see Figure 3-4.) The
Memory Display shows:
Memory No 1 []
Select Mem & Press }
Press the { key to return to attribute
selection.
Selecting Memories
In PROGRAM mode, once a
programmed memory has been
selected for a short time, that memory
becomes live on the DMX output.
When the memory number is changed,
the old memory is immediately
removed from the DMX output.
However, the new memory is not
added to the DMX output until the
memory number has been selected for
a short time. This allows the operator
to step through memories slowly and
see them fade in, or to step through
quickly, and not transmit them on the
DMX output until the memory number
has not been
/p3-4/3
changed for a short time. In Brightness,
this effect is easily seen in the output
lights and on the monitor.
The same fading in of memories
results when using the [ and ] keys to
move between memories for any of the
four attributes.
This feature is very useful for latest
takes precedence (LTP) memories
(Colour, Beamshape and Position).
Whilst the memories are stepped
through quickly, the memory data is not
sent to the DMX outputs.
n
Figure 3-5: Memory Display and Arrow buttons
3
n
Figure 3-6: Attribute Memory Selection buttons
Program Mode
3 - 4
7364000/p3-4/3