Zero 88 SIRIUS 500 страница 92 Скачать руководство пользователя

Страница: 92 / 119

/p5-25/3

Wheel Assignment

When all the parameter data has been

entered, it is necessary to check the

wheel assignment. The system does

this automatically by parameter type

and in the order in which they are

entered. The first one entered is in the

first wheel group and on the first wheel

(index finger). The second one entered

is in the first wheel group and on the

second wheel. The third is on the third

wheel and the fourth on the thumb

wheel. The fifth is in the second wheel

group and on the first wheel, and so on.

The exception to this is Position. In this

instance, the Pan control is on the

thumb wheel and the Tilt control is on

the index finger wheel. This is repeated

on all position wheel groups. Also the

second and third wheels on the first

wheel group are assigned to the

control of movement effects. Any other

Position parameters are assigned as

normal to the second and third wheels

of subsequent wheel groups.

Press the ] key to open the Wheel

Assignments screen. This shows a

list of all the parameters, grouped

by type, with all names and

channel numbers shown, together

with the default values. It is not

possible to change any of this

information in this screen.

The fifth column on the screen is

Group and the current parameter

is highlighted. Use the { and }

keys to select the parameter to

edit. It is possible to change the

wheel group by overtyping the

number.

If the Group number is OK press

PROGRAM. To highlight the

Wheel column and the Assigned

Wheel. Press the ] key to cycle

the assignment of the wheels.

When the parameter is assigned to

the correct wheel, Press the } key

to move the next parameter.

When all the data is correct use

the } key to move the active line

to the bottom of the window and

press [ to return to the main menu.

NOTE

Wheel Assignment

If all the wheels in a group are assigned,

moving any one of them will affect the

assignment of all of them.

Wheel Groups

It is not possible to put more than four

parameters in a group - the system will not

permit this and a warning appears. One of

the others must first be moved to create an

empty slot in that group.

Figure 5-22:
Wheel Assignments Screen

Set-Up: Fixture Set-Up

7364000/p5-25/3

5 - 25

Содержание SIRIUS 500
























































































































Результаты поиска

Содержание SIRIUS 500

Отзывы:

Похожие инструкции для SIRIUS 500

Бренды по названию

Популярные бренды

Zero 88 SIRIUS 500, Руководство оператора

Результаты поиска

Содержание SIRIUS 500

Отзывы:

Похожие инструкции для SIRIUS 500

Бренды по названию

Популярные бренды