Zero 88 SIRIUS 500, Руководство оператора

Страница: 33 / 119

Programming a Beamshape Memory
(Full Scene)
1 Press the attribute selection button
for BEAMSHAPE. The Memory
Display shows:
Memory No 1-1* []
User Info/Text
Select Mem & Press }
(See Figure 3-13 for monitor
display.)
The
Memory Number
is displayed
as
page number - memory
number
, and corresponds to the
BEAMSHAPE memory buttons.
Select the
Memory Number
by
using either the [ and ] keys, the
attribute memory buttons, or
directly from an external keyboard.
A star by the memory number
indicates that it is unprogrammed.
2 Press the } key.
Memory Type.
Full scene []
Select Type & Press }
Use[and ] to select
Full scene
.
3 Press the } key.
Memory Data (Beams)
Select Fixtures and
Adjust Beam on
Wheels and Press }
To set the parameters, press the
channel flash buttons to select
individual or multiple fixtures to be
edited. Those available to be
modified have a yellow light in the
button, which turns red once
selected. The Wheel Display
indicates how the various fixture
parameters have been mapped
onto the 4 Wheel Drive
®
.
If the selected fixtures have more
than four Beamshape parameters,
use the WHEEL GROUP button to
move between the groups. Adjust
the settings of the parameters by
moving the wheels. This can be
seen live on the outputs.
4 Continue selecting fixtures and
adjusting Beamshape parameters
until the whole scene has been set.
5 Press the } key.
Memory Text/Info
Enter Text & Press }
/p3-14/3
Enter a description of the memory
using the channel flash buttons, or
using the external keyboard.
6 Press the } key.
Memory Data (Trans)
TRANSITION xx:xx:x
Set Trans. Time on
Wheels and Press }
Alter the transition time using the
wheel indicated in the Wheel
Display.
7 Press the } key.
Memory Data
Press Program
to Save Memory
Press the PROGRAM button to
save the memory and return to the
Memory Number
window.
Or press { to revert to
Transition
.
3
Programming Memories
3 - 14
7364000/p3-14/3