Zero 88 SIRIUS 500, Руководство оператора

Страница: 102 / 119

Brightness Submasters
Running the Show Manually
Brightness memories that have already
been recorded can now be transferred
out to BRIGHTNESS SUBMASTERS,
with or without their fade times. This
must be done in PROGRAM mode,
see the sections on Transferring a
Brightness Memory to a Submaster on
page 3-10.
The show can be run purely by
operating the BRIGHTNESS and
FOCUS SUBMASTERS.
Using a Brightness Submaster Fader
Ensure that different memories are
transferred with time to PAGE 1 and 2,
SUBMASTER 1, and without time to
PAGE 1 and 2, SUBMASTER 2.
1 Ensure that all BRIGHTNESS
SUBMASTER faders are set to
zero.
2 Select page one by pressing the
PAGE 1 button. The red light in the
button comes on.
3 Move submaster fader 1 from zero
to full.
4 The red light in BRIGHTNESS
SUBMASTER 1 FLASH button
comes on if the memory was
transferred with time.
5 The outputs fade up, and once at
100% the red light in the FLASH
button goes out.
6 Move submaster fader 2 from zero
to full.
7 The light in the SUBMASTER 2
FLASH button remains off
indicating that the memory was
transferred with ‘no time’
associated.
8 The memory on BRIGHTNESS
SUBMASTER 2 is now live on the
outputs, and is mixed in with the
memory on SUBMASTER 1 on an
HTP basis.
9 Lower fader 1 to zero. The red light
in the FLASH button comes on
indicating that the fade is taking
place and goes out when the fade
has completed.
10 The memory on BRIGHTNESS
SUBMASTER 2 is now the only
memory that is live.
/p6-9/3
Accessing a Memory on a Different
Page (Page Overlay)
This feature is called Page Overlay and
operates on all four pages of each of
the BRIGHTNESS SUBMASTERS.
The following example illustrates how
Page Overlay works.
1 Ensure that all BRIGHTNESS
SUBMASTER faders are set to
zero.
2 Press the PAGE 1 button.
3 Move submaster fader 1 from zero
to full.
The PAGE 1 SUBMASTER 1
memory is now output live.
4 Press the PAGE 2 button.
5 The light in BRIGHTNESS
SUBMASTER 1 FLASH button
flashes indicating that the fader is
outputting a memory that is not on
the current page.
6 Move submaster fader 2 from zero
to full.
PAGE 2 SUBMASTER 2 is now
also output live.
7 Press the PAGE 3 button.
8 The lights in both BRIGHTNESS
SUBMASTER 1 and 2 FLASH
buttons flash indicating that the
faders are outputting memories
that are not on the current page.
9 Press the PAGE 1 button.
10 The red light in the BRIGHTNESS
SUBMASTER 1 FLASH button
goes out indicating that the
memory is now on the current
page, whilst the light in the
SUBMASTER 2 FLASH button still
flashes.
11 Move fader 2 to zero.
12 When the output of Page 2,
BRIGHTNESS SUBMASTER 2
reaches zero, the submaster
content changes to the current
page (i.e. Page 1) and is output
when the fader is moved from
zero.
NOTE
Hotlinks
Submaster Faders can be programmed so
that when they are moved in Run mode they
action a Focus Submaster. For
programming details see the section on
Hotlinks 6-11.
6
n
Figure 6-12:
Brightness Submaster pages
Brightness Submasters
7364000/p6-9/3
6 - 9