Zero 88 SIRIUS 500, Руководство оператора

Страница: 83 / 119

Adding Duplicate Auxiliary Controls
1 Follow points 1 to 6 from the
section on Setting the Auxiliary
Controls.
2 Press the } key once.
Aux Control 1:
Duplicates= 0
Enter No Duplicates
Press } to Continue
Enter the required number of
duplicates (maximum nine).
3 Press the } key once.
Aux Cntrl 1 DMX 500
Primary Output ]
Select Instance
Press } to Continue
Use the [ and ] keys to review
the settings of the Primary Output
and Duplicates.
Return to first duplicate using
the[ and ] keys.
4 Press the } key once.
Aux Cntrl 1 Dup: 1
DMX Address _
Enter Address and
Press Prog for More
Enter the DMX address using the
channel flash buttons, or using the
external keyboard.
5 Press the PROGRAM button to
confirm the above DMX address.
The top line of the Memory display
changes to the next Duplicate of
the Auxiliary Control.
Aux Cntrl 1 DMX 2
DMX Address _
Enter Address and
Press Prog for More
6 Enter the DMX address using the
channel flash buttons, or using the
external keyboard.
7 Press the PROGRAM button to
confirm the DMX address.
8 Repeat points 6 and 7 until all
instances have been programmed.
9 When the PROGRAM button is
pressed to confirm the last DMX
address, the Memory Display
shows:
Auxiliary Control
Finished
Press [ to Return
or } to Continue
10 Press the [ key twice to return to
the Assign Fixtures screen.
/p5-16/3
NOTE
Auxiliary Controls
Duplicate Auxiliary Controls can be set up at
the same time as the primary instance an
Auxiliary Control. The instructions are
detailed separately for ease of reference.
5
SetUp: Desk SetUp
5 - 16
7364000/p5-16/3